Welcome to my little corner of "The Cloud"
LIST OF ALL POSTS BOTTOM LEFT SIDE OF PAGE.
All patterns are written in US terms.
Double click page photos to enlarge

Popular Patterns

Friday, April 7, 2017

Pansies In Repose

Pansies in Repose
This afghan and all other round ripple afghans, that are posted here, are  made with basic round ripple afghan pattern found on this blog.  It was written so anyone could become a designer.  Each pictured afghan has its own “Personality Profile Page” where you will find the detailed schematics needed to create a duplicate.

The Basic Round Ripple Afghan Pattern is here
For those new to the Round Ripple concept, but still a bit cautious,
this page is to explain what to expect before you begin

Materials: 


I crochet snug, to allow for those don't I choose no dye lot yarns but that is not possible with the variegated yarns.  *Check your dye lot. 


Red Heart Super Saver Yarn,     
E300 3955* Wildflower (5) 5 oz. skeins  
E300 358 Lavender (1) 7 oz. skein
E 300 385 Royal Blue  (1) 7 oz. skein
E300 672 Spring Green  (2) 7 oz. skeins
Size I – 9 or 5.5 mm Susan Bates Silvalume hook.
Finished Size Approximately 70 inches point tip to tip

Once the points are established this pattern is a three (3) round repeat.   In order to keep your project flat you will be working one (1)  round with even shells, at the point, followed by two (2) rounds with increase shells.  
All rounds are worked face up and all rounds are Joined.
All rounds skip two stitches at the bottom of the points,  they are always the last stitch of the point you are on and the first stitch of the new point.  
Join every round
 
Special Stitch Patterns:             
Even shell = (dc, ch 2, dc) in two chain space of each point. 
Increase shell = (2 dc, ch 2, 2 dc) in two chain space of each point. 
Red indicates a round with even shells round

CHANGING COLORS    * When changing colors always rotate your project one (1)  point clockwise to avoid a pronounced joining line.  Starting in the valley between points, skip the first stitch and join new color in the second stitch, on the right hand side of your beginning point.  Work designated pattern stitch around. 

Pattern:  Start with a "magic circle" or Ch 4 using Wildflower

Round 1: Ch 2, counts as first dc throughout pattern, work 11 dc in ring, join with sl st in top of ch 2 throughout pattern. (12 dc)

Round 2: Ch 3, dc in same st, in next dc work,  (*1 dc ch1, 1 dc)  repeat around,  join to the second chain of  the beginning  3 chain.  Join.  Creates 12 even shells.
Round 3: Sl st in first ch 1 sp,  Ch  2, counts as first dc,  1 dc, ch 2, 2 dc,  all in same space, increase shell made, work (*2 dc, ch 2, 2 dc, in each chain 1 space),  join. (12 increase  shells)
Round 4:   Ch 2, counts as first dc, in ch 2 space work, * (2 dc, ch 2, 2 dc), dc in next st, sk 2 sts,   dc in next st , repeat  around,  ending  sk 2 sts.  Join.  6 dc each point

Round 5:  Ch 2, dc in next dc,  in ch 2 space work , (*1 dc, ch 2, 1 dc) dc in next 2 dc, skip next 2 dc, dc in next 2 sts.) Repeat from * around, sk last st,  join to top of ch 2.   Each point should now have ((2 dc, an “even shell”, 2 dc )) for a total of 6 dc each point
Round 6: Ch 2, dc in next st, (*work an increase shell  in ch 2 space, dc in each of next 2 dc, skip the next 2 sts, dc in each of next 2 dc.) Repeat from * around, ending with skip last st. Join to top of ch 2. (Each point now has  8 stitches (2 on each side of an increase  shell)
Round 7:  Ch 2, dc in each dc to point, * work increase shell in point, dc in each dc around,  always skipping 2 sts in the valley,   Repeat from * around, ending with skip 1 st. Join.
Round 8: ch 2, dc in next 2 sts, * work even shell in ch 2 space, dc in next 3 sts, skip next 2 sts, dc in the next 3 sts. Repeat from * around, ending with skip last st. Join. Each point now has 3dc, an even shell, 3 dc for a total of 10 stitches 
Round 9:  Sl st into next st, Ch 2, dc in each stitch to point,  work “increase shell:  in point,  dc in each st to valley, sk 2 sts. Repeat from * around, ending with skip last st. Join
Round 10: Sl st into next st, ch 2, *dc to point, work increase shell in ch 2 space of point, dc in each stitch to valley, skip 2 sts,  Repeat from * around, ending with skip 2 sts. Join.
Round 11:  Join Lavender as per *color change, ch 2, working in established pattern sequence complete this round as an even round.  Join
Round 12: Work double crochet  in pattern sequence,  as an increase round, Join
Round 13: Join Spring Green,  Single Crochet (instead of double crochet)  in each stitch to point, working  (2 sc, ch 3, 2 sc) in point, continue around.  join. 
Round 14:   Join Royal Blue, chain 2, double crochet in each stitch to the point (1 dc, ch 2, 1 dc) in ch 3 space of point continue around,  working as an even shell round.   Join. 
Round 15:   Join Spring Green with a Single Crochet in first working stitch, chain 3, skip 3 stitches, single crochet between the  next 2 double crochet, repeat to point, work (2 sc, ch 3, 2 sc) to creates a loop in point, continue pattern sequence as an increase around.  Join
Round 16: Join Royal Blue in the  first 3 chain loop, chain 2, 2 dc in same space,  work 3 dc in each 3 chain space to point, work ( 2 dc, ch 2, 2 dc) in point, follow pattern stitch around, join.     
Round 17: Join Spring Green,  working  pattern sequence for even round, Single Crochet instead of double crochet, sc  in each stitch to point, working  (1 sc, ch 3, 1 sc) in point, continue around.  join. 
Round 18: Join Lavender, in double crochet, work as increase round
Round 19: With Lavender, in double crochet, work as increase round
Round 20  Join Wildflower,  work rounds 20 through 29 in double crochet following pattern sequence.  Join each round.

Red indicates even rounds:  

Rounds  21, 22, 23, 24, 25, 26, 27, 28, 29

Round 30: Join Lavender as per *color change, increase round
Round 31: Work double crochet, work as increase round
Round 32: Join Spring Green,  Single Crochet (instead of double crochet)  in each stitch to point, working  (1 sc, ch 3, 1 sc) in point, continue pattern sequence  around.  Join.
Round 33: Join Royal Blue, double crochet in each stitch to the point (2 dc, ch 2, 2 dc) in ch 3 space of point continue around,  working as an increase shell round.   Join.  
Round 34:   Join Spring Green with a Single Crochet in first working stitch, chain 3, skip 3 stitches, single crochet between the  next 2 double crochet, repeat to point, work (2 sc, ch 3, 2 sc) to creates a loop in point, continue pattern sequence as an increase around.  Join
Round 35: Join Royal Blue in the  first 3 chain loop, chain 2, 2 dc in same space,  work 3 dc in each 3 chain space to point, work ( 2 dc, ch 2, 2 dc ) in point, follow pattern stitch around, join.   
Round 36: Join Spring Green,  working  pattern sequence for even round, Single Crochet instead of double crochet, sc  in each stitch to point, working  (1 sc, ch 3, 1 sc) in point, continue around.  join. 
Round 37: Join Lavender double crochet per pattern sequence
Round 38: Work double crochet in pattern sequence, join
Round 39: Join Wildflower work double crochet per pattern sequence, Join
Round 40: Work  in double crochet Join
Round 41: Work  in double crochet  Join

Border Pattern Stitch =  (dc, ch 1, dc, in same space)  “V” stitch made.  


You will be working (“V” stitch, ch 3, “V” stitch) in the points.  

Count backward from the point to the bottom to determine your starting stitch.  You will be skipping the  2 stitches at the bottom as the basic pattern requires.  


Note: here the number of stitches worked out that I would have to miss 4 stitches in the valley which would be too many. To fix this I worked 1 dc, and only skipped 1 stitch, before starting the "V" stitch pattern, ending each point with sk 1 stitch, 1 dc in the last stitch.  This creates an inverted "V" over the 2 skipped stitches in the valley. 



Round 1  Join spring green in the designated stitch, ch 4, dc in same space, first “V” st,  (*sk 2 stitches, “V” st in next st to point* )  Work “V” st, chain 3  “V” st  in point, work pattern stitch to bottom of point and skip number of stitches needed to keep sides even.  Work around, join to third chain of beginning chain 4.  (You will need the extra stitches in the points to keep the pattern flat)

Round 2: Sl st into center of the “V” stitch, ch 4, dc in same space,  “V” st in the center of each “V” st  to the point,  For the point work “V” st, in the first “V” ;   “V” st  in the 3 chain space, “V” st in the 2nd existing “V” st  all in the same point, work around, join.
  
Repeat Round 2 till border is the width you want up to the last round.

Final Round Picot stitch: 
 Double crochet, chain 3, slip st in first chain, dc in same stitch = "V" st with picot.

Final Round
Work "V" st with picot st, in the center of each “V” st of the previous row, working (dc, picot, dc, picot, dc, picot, dc) in the center 3 chain space of each point.





2 comments:

  1. HI DORIE! NICE TO SEE YOU POSTING AGAIN! I'M STILL MAKING BABY BLANKETS FOR A LOCAL NICU FROM YOUR PATTERN. HOPE ALL IS WELL!LOVE TO YOU, DIANNE

    ReplyDelete
    Replies
    1. Hello again. Hard to decide where to put my time, crocheting or writing about it. Figured the blog could use an update. Thanks for dropping in. Dorie

      Delete